博世壁挂炉熄火故障 博世壁挂炉是一种现代家庭中常见的家用煤气炉，它是一种可以提供安全、节能、高效的热水和室温调节的设备。然而，它也会出现故障，其中最常见的是熄火故障。 博世壁挂炉熄火故障一般是由于火焰不足或火焰太大导致的，火焰不足时，可能是由于燃料消耗过快，火焰太小，炉膛温度过低，从而导致熄火。火焰太大时，可能是由于燃料燃烧不足，火焰太大，炉膛温度过高，从而导致熄火。 要解决博世壁挂炉熄火故障，首先要检查火焰是否正常，如果火焰不足，要检查燃料是否消耗过快，检查燃料管是否堵塞或漏气，更换堵塞或漏气的燃料管，检查火焰调节器是否失效，更换失效的火焰调节器，检查炉膛是否有渣滓，清理炉膛渣滓，检查炉膛温度是否正常，调整炉膛温度。 如果火焰太大，要检查燃料是否燃烧不足，检查燃料管是否有漏气，更换漏气的燃料管，检查火焰调节器是否失效，更换失效的火焰调节器，检查炉膛是否有渣滓，清理炉膛渣滓，检查炉膛温度是否正常，调整炉膛温度。 此外，还要检查煤气管是否有漏气，煤气管是否有堵塞，煤气量是否正常，电控箱的电源是否正常，电控箱的电路是否正常，以及火焰传感器是否正常。 最后，正确使用和维护博世壁挂炉是非常重要的，及时发现故障，及时进行维修，可以有效地延长炉子的使用寿命，避免熄火故障的发生。 Bosch Wall-Mounted Stove Extinguishing Fault Bosch wall-mounted stove is a common household appliance in modern families. It is a device that can provide safe, energy-saving and efficient hot water and room temperature adjustment. However, it can also malfunction, and the most common one is extinguishing fault. Bosch wall-mounted stove extinguishing fault is generally caused by insufficient flame or too large flame. When the flame is insufficient, it may be due to too fast fuel consumption, too small flame and too low furnace temperature, resulting in extinguishing. When the flame is too large, it may be due to insufficient combustion of fuel, too large flame and too high furnace temperature, resulting in extinguishing. To solve the extinguishing fault of Bosch wall-mounted stove, first of all, check whether the flame is normal. If the flame is insufficient, check whether the fuel is consumed too fast, check whether the fuel pipe is blocked or leaking, replace the blocked or leaking fuel pipe, check whether the flame regulator is faulty, replace the faulty flame regulator, check whether the furnace has slag, clean the slag in the furnace, check whether the furnace temperature is normal, adjust the furnace temperature. If the flame is too large, check whether the fuel is insufficient combustion, check whether the fuel pipe is leaking, replace the leaking fuel pipe, check whether the flame regulator is faulty, replace the faulty flame regulator, check whether the furnace has slag, clean the slag in the furnace, check whether the furnace temperature is normal, adjust the furnace temperature. In addition, check whether the gas pipe is leaking, whether the gas pipe is blocked, whether the gas volume is normal, whether the power supply of the electric control box is normal, whether the circuit of the electric control box is normal, and whether the flame sensor is normal. Finally, it is very important to use and maintain Bosch wall-mounted stove correctly. Finding faults in time and repairing them in time can effectively prolong the service life of the stove and avoid the occurrence of extinguishing fault.